It’s 2024 and navigating the Internet without protection could likely put you on the very long list of victims of...
Wireless technology continues to evolve and improve with each new WiFi standard. WiFi systems are easy to set up and...
Gain an understanding of WiFi routers and how they work. Learn about the different types of routers and which would...
XD1200K-M is a dual-band ceiling-mounted wireless access point that uses the 802.11a/b/g/n/ac wave2 wireless network standards. It operates in the 2.4GHz and 5GHz ISM wireless frequency bands, and can support up to 128 concurrent wireless connections for high-speed internet access. With a Gigabit Ethernet interface, it supports remote PoE (Power over Ethernet) power supply according to the 802.3af/at standards. In the 2.4GHz 802.11n mode, it can provide a maximum speed of 300Mbps, while in the 5GHz 802.11ac mode, it can provide a maximum speed of 867Mbps, resulting in a total wireless throughput of up to 1200Mbps. It features high power, high gain, high receive sensitivity, low latency, and high density, enabling it to cover larger areas and provide superior wireless transmission performance and stability. Its ceiling-mounted design, integrated Ethernet interface, and sleek appearance make it easy to deploy, and it can be seamlessly integrated into the ceiling or wall without disrupting the overall interior design layout. It is an ideal choice for wireless access in large-scale, low-density, high-bandwidth environments such as hotels, supermarkets, offices, KTVs, and restaurants.
Product Features
1) Utilizing cost-effective wireless chips from MediaTek and adhering to industrial standard circuit design. Equipped with an enhanced heat sink and optimized air duct design, eliminating the risk of overheating during scorching summer days. Ensures real-time, long-term, stable, and efficient transmission of user network data, enhancing user experience.
2) Supports 802.11a/b/g/n/ac wave2 protocols, providing wireless access speeds of 2.4G 300Mbps and 5G 867Mbps. The overall device offers a wireless access speed of up to 1200Mbps.
3) Equipped with an external professional independent WiFi RF amplifier chip, ensuring wider signal coverage, higher rates, and longer transmission distances.
4) Paired with integrated software for both small and large-scale scenarios. Can be used individually for small venues or combined with gateway devices for batch deployment in medium to large-scale scenarios, meeting the requirements of various complex network environments.
5) Supports remote management via cloud platforms and WeChat mini-programs. Enables real-time remote viewing, configuration, upgrades, and maintenance.
6) Continuous product updates, feature enhancements, and performance optimizations to adapt to various network environments and improve user experience.
Specification
| Hardware configuration | |
| Main Chip | MTK7621A+MTK7613B+MTK7603 |
| Frequency | MIPS dual-core 880MHz |
| Memory | 128MB |
| Flash | 16MB |
| Wireless Technology | – 2.4G WiFi: 2×2 802.11b/g/n (Theoretical maximum speed up to 300Mbps)- 5.8G WiFi: 2×2 (2-stream) MU-MIMO 802.11a/n/ac Wave2 (Theoretical maximum speed up to 867Mbps) – TxBF (Transmit Beamforming): Beamforming technology that concentrates the wireless signal in specific directions, enhancing the transmission and reception performance of the signal. |
| Device Interfaces | WAN PoE*1/LAN*1 10/100/1000Mbps adaptive
DC direct power supply interface, suitable for connecting power plugs with an outer diameter of 5.5mm, inner diameter of 2.1mm, and length of 9.5mm or above. |
| Buttons | Reset button for factory reset (long press for 6 seconds to reset) |
| Indicators | Status indicators |
| Antennas | Built-in 2.4G 2dBi FPC antenna * 2
Built-in 5.8G 2dBi FPC antenna * 2 |
| Power | 48V 802.3af/at PoE, DC 12V/1A |
| Operating/Storage Temperature | -10℃~45℃/
-20℃~70℃ |
| Operating/Storage Humidity | 10%~90%(non-condensing) /
5%~90%(non-condensing) |
| Dimensions | 190*190*45mm |
1、OEM/ODM service is accepted?
Can I get my products customized?
OEM/ODM service is available.
What kind of service do you offer
1）Custom solutions for WIFI system
2）Replacement and enhancement of connectors, antennas, modules, and GPS systems
3）Custom logo design
4）Label creation and application
5）.And more
2、When I can get the price?
Our sales team usually quote within 8 hours after we get your inquiry with full detail.
Any urgent cases, please contact us directly by phone or send eamil to our official email.
3、Will I be able to see a prototype before placing my order?
Yes, Before any order proceeds into production,we require that you see and approve of it.
4、How long is the production lead time ?
Generally our lead time is approximately 7 days depending on the quantity,however if your order has a hot deadline we will do our absolute best to meet your deadline.
5、How to update the firmware of our router to the latest version
If you want to learn more about these services,give us a call, we will be more than happy to guide you through the process.
Related Products
Contact Us Now
If you are interested in contacting HUASIFEI for any business to business information;
please leave us a message or send us an email huasifei@huasifei.com. we will get back to you within 2-3 business days.
5G Cellular Router
Esim Mobile WiFi Hotspot
Wireless Bridge
4G Cellular Router
Home Wireless Router
Access Point
Warranty Policy
Downloads
OEM / ODM
Home solutions
Business Solutions
Industrial Solutions
© Huasifei Holdings, Inc. 2024. All rights reserved. | Privacy Policy | Cookie Policy
