It’s 2024 and navigating the Internet without protection could likely put you on the very long list of victims of...
Wireless technology continues to evolve and improve with each new WiFi standard. WiFi systems are easy to set up and...
Gain an understanding of WiFi routers and how they work. Learn about the different types of routers and which would...
The XD1800K-M is a ceiling-mounted dual-band wireless access point that utilizes the 802.11ax wireless network standard. It operates in both the 2.4GHz and 5GHz ISM wireless frequency bands, meeting the demand for high-speed wireless internet access for up to 128 concurrent users. With a Gigabit Ethernet interface, it supports remote Power over Ethernet (PoE) supply according to the 802.3af/at standard.
In 802.11ax mode, it can achieve a maximum throughput of 573Mbps in the 2.4GHz band and 1201Mbps in the 5GHz band, resulting in an overall wireless speed of up to 1800Mbps. This access point offers high performance, high gain, high receiver sensitivity, high bandwidth, low latency, high density, and high access capabilities. It not only provides coverage over larger areas but also delivers enhanced wireless transmission performance and stability.
Ceiling-mounted appearance design, integrated Ethernet interface, sleek and aesthetically pleasing design, and convenient deployment. Easily deploy wireless WiFi6 on ceilings or walls without disrupting the overall interior layout, making it the ideal choice for high-density, high-bandwidth wireless access in hotels, supermarkets, offices, conference rooms, KTVs, restaurants, and other environments.
Product Features
1) Designed based on carrier standard hardware, with electromagnetic interference resistance that complies with the requirements of YD/T968-2010 “Electromagnetic Compatibility Requirements and Measurement Methods for Telecommunication Terminal Equipment”. It also meets the overvoltage and overcurrent protection requirements specified in YD/T 993-2006 “Technical Requirements and Test Methods for Lightning Protection of Telecommunication Terminal Equipment”, including analog lightning strikes, power line induction, and power line contact, with a protection capability of common mode 6KV and differential mode 1.5KV. The surge protection capability meets the requirements of YD/T1082-2011 “Technical Requirements and Test Methods for Overvoltage, Overcurrent Protection, and Basic Environmental Adaptability of Access Network Equipment”.Enhanced heat dissipation design with optimized heat sinks and air ducts, ensuring uninterrupted operation even in hot summer days. It fully guarantees the real-time, long-term, stable, and efficient transmission of user network data, enhancing the user experience.
2) Supports the 802.11AX protocol, providing wireless access speeds of 573Mbps in the 2.4GHz band and 1201Mbps in the 5GHz band, with a total wireless access speed of 1800Mbps.
3) Equipped with an external professional WiFi 6 MIMO RF chip to ensure wider signal coverage, higher rates, and longer transmission distances.
4) Supports HNAT hardware fast forwarding, with wired bidirectional forwarding performance of up to 2Gbps on the WAN port.
5) Features MU-MIMO, OFDMA, BSS Color, high-speed rates, and improved coverage range, as well as low latency characteristics. Provides better wireless network performance and user experience in high-density network environments and scenarios with a large number of connected devices.
6) Works with integrated thin and fat software. Can be used individually for small-scale deployments and can be used in conjunction with gateway devices for large-scale deployments. Suits various complex network environments.
7) Supports remote management via cloud platforms and WeChat Mini Programs. Allows real-time remote viewing, configuration, upgrades, maintenance, and more.
8) Provides continuous product updates, feature enhancements, and performance optimizations to adapt to various network environments and improve the user experience.
Specification
| Hardware configuration | |
| Main Chip | MT7621A+MT7905DAN+MT7975DN
High-performance enterprise-level chip |
| Frequency | MIPS dual-core 880MHz |
| Memory | 256MB |
| Flash | 16MB |
| Wireless Technology | – 2.4G WiFi 2*2 802.11b/g/n/ax (theoretical maximum speed up to 573Mbps)
– 5.8G WiFi 2*2 802.11a/n/ac/ax (theoretical maximum speed up to 1201Mbps) – 1024QAM high-speed access rate, OFDMA high-density user access – OFDMA/MU-MIMO uplink/downlink – BSS Color spatial reuse – Space-time block code (STBC), low-density parity check (LDPC), beamforming TX/RX for uplink and downlink Power-saving features: single antenna standby technology, dynamic MIMO power-saving technology, enhanced automatic power-saving transmission technology, packet-by-packet power control technology, etc. |
| Device Interfaces | WAN PoE*1/LAN*1 10/100/1000Mbps adaptive
DC direct power supply interface, suitable for connecting power plugs with an outer diameter of 5.5mm, inner diameter of 2.1mm, and length of 9.5mm or above. |
| Buttons | Reset button for factory reset (long press for 6 seconds to reset) |
| Indicators | Status indicators |
| Antennas | Built-in 2.4G 2dBi FPC antenna * 2
Built-in 5G 2dBi FPC antenna * 2 |
| Power | 48V 802.3af/at PoE power supply,DC 12V/1A |
| Operating/Storage Temperature | -10℃~45℃/-20℃~70℃ |
| Operating/Storage Humidity | 10%~90%(non-condensing) /
5%~90%(non-condensing) |
| Dimensions | 190*190*45mm |
| WiFi Spec | |
| Frequency Range | 2.4G:2.4~2.4835GHz
5G: UNII-1: 5.15~5.35GHz UNII-2: 5.47~5.725GHz UNII-3: 5.725~5.825GHz |
| Channel | 2.4G: 1,2,3,4,5,6,7,8,9,10,11,12,13
5G: 36,40,44,48,52,60,64,149,153,157,161,165 |
| Modulation | 802.11b: DSSS (DQPSK, DBPSK, CCK)
802.11g: OFDM (BPSK, QPSK,16-QAM) 802.11n: OFDM (BPSK, QPSK,16-QAM, 64-QAM) 802.11ac: OFDM (BPSK, QPSK,64-QAM, 256-QAM) 802.11ax: OFDMA (BPSK,256-QAM, 1024-QAM) |
| Transmission Rate | 11b up 11Mbps,11g up 54Mbps,11n up 300Mbps
11ac up 864.7Mbps,11ax 2.4G up 573Mbps, 11ax 5G up 1201Mbps |
1、OEM/ODM service is accepted?
Can I get my products customized?
OEM/ODM service is available.
What kind of service do you offer
1）Custom solutions for WIFI system
2）Replacement and enhancement of connectors, antennas, modules, and GPS systems
3）Custom logo design
4）Label creation and application
5）.And more
2、When I can get the price?
Our sales team usually quote within 8 hours after we get your inquiry with full detail.
Any urgent cases, please contact us directly by phone or send eamil to our official email.
3、Will I be able to see a prototype before placing my order?
Yes, Before any order proceeds into production,we require that you see and approve of it.
4、How long is the production lead time ?
Generally our lead time is approximately 7 days depending on the quantity,however if your order has a hot deadline we will do our absolute best to meet your deadline.
5、How to update the firmware of our router to the latest version
If you want to learn more about these services,give us a call, we will be more than happy to guide you through the process.
Related Products
Contact Us Now
If you are interested in contacting HUASIFEI for any business to business information;
please leave us a message or send us an email huasifei@huasifei.com. we will get back to you within 2-3 business days.
5G Cellular Router
Esim Mobile WiFi Hotspot
Wireless Bridge
4G Cellular Router
Home Wireless Router
Access Point
Warranty Policy
Downloads
OEM / ODM
Home solutions
Business Solutions
Industrial Solutions
© Huasifei Holdings, Inc. 2024. All rights reserved. | Privacy Policy | Cookie Policy
